Panel Pre-filter Mesh
Panel Pre-filter Mesh is the primary protection component of the air filtration system, designed for intercepting large particle pollutants (such as dust, hair, fiber, insects, etc.). It is usually installed at the front end of the filtration equipment to protect the high-efficiency filter (such as bag filter, HEPA) at the back end from being blocked […]
Paint Stop Filter
The Paint Stop Filter is an indispensable core filtration device in the painting process. It is designed to efficiently capture overspray paint mist, solvent volatiles (VOCs) and fine particles generated during painting operations. It is usually installed on the top or rear filter section of the paint spraying room. Through physical interception, adsorption and chemical […]
Nylon Mesh Filter
Nylon mesh filter is an efficient and durable filter component made of nylon (polyamide, PA) material. With its excellent mechanical strength, chemical stability and reusability, it is widely used in liquid filtration, air pre-filtration and industrial screening scenarios. It achieves graded interception through a precisely woven mesh structure, combining the advantages of high-efficiency filtration and […]
Non-woven Washable Filter for Humidifier
Non-woven washable filter is the core filter component of evaporative humidifier. It is made of high-density synthetic fiber (polyester or polypropylene) through hot melt process. It has the characteristics of high-efficiency filtration, antibacterial and antibacterial, and reusable. With its core advantages of low cost, easy maintenance and long life, it has become an ideal choice […]
Mini-Pleated HEPA Filter
Mini-Pleated HEPA Filter is a high-efficiency air purification device designed for space-constrained scenarios. It achieves a large filtration area in a compact volume through a micro-pleated structure (Mini-Pleated), meets EN 1822 H13-H14 or ISO 16890 ePM1 95%-99.95% standards, and can intercept ≥99.97% of 0.3μm particles (such as viruses, bacteria, smoke and ultra-fine dust). It is […]
Introduction to Metal Mesh Filter
Metal mesh filter is a durable filter component based on metal material weaving or stamping. With its high mechanical strength, extreme environment resistance and reusability, it is widely used in industrial screening, liquid/gas pre-filtration and high temperature and high pressure scenarios. It achieves efficient interception through a precisely designed mesh structure, has both long life […]
Introduction to MERV 8/11/13/14 Paper Frame Filter
MERV 8/11/13/14 Paper Frame Filter is a medium-efficiency air filtration device based on the ASHRAE 52.2 standard classification. It adopts multi-layer composite filter material and rigid cardboard frame design, and is specially designed to provide particle classification interception solutions for commercial buildings, industrial facilities and clean environments. With its lightweight, cost-effective and easy-to-replace characteristics, it […]
Melt Blown Fabric Introduction
Melt blown fabric is a high-performance nonwoven material composed of ultrafine fibers. After the polymer (such as polypropylene PP) is melted at high temperature through the melt-blowing process, it is stretched into micron-level fibers by high-speed airflow and randomly stacked into a net. With its fine fiber diameter (1-5μm), high porosity and uniform distribution, it […]